Custom engraved anodized aluminium nameplates
Identification plates in anodized aluminium, in silver, black or colours, for the permanent marking of machines, equipment and assets. They are customized by laser engraving, chemical etching with colour fill, screen printing or UV printing, and can carry a serial number, barcode, QR or DataMatrix.
The content of the plate is supplied by the customer, as the equipment production partner; we work from the artwork they have approved and signed.
In short
What it is: Anodized aluminium with laser, screen print or chemical etch; serial no.
What we need to quote: Vector file (AI, PDF or DXF); Dimensions, thickness and material; Holes, adhesive and rounded corners.
Scope to check: References equipment makers usually consult: Regulation (EU) 2023/1230 on machinery (Article 10(5) and (6) and Annex III 1.7.3; applicable from 14 January 2027), Directive 2014/35/EU on low voltage and Regulation (EU) 2019/1781.
Product fit
Choose it if: Machinery makers: pumps, valves, compressors, HVAC, motors and electrical distribution equipment; Electrical panels and automation.
Check before ordering: Vector file (AI, PDF or DXF); Dimensions, thickness and material.
Limit: References equipment makers usually consult: Regulation (EU) 2023/1230 on machinery (Article 10(5) and (6) and Annex III 1.7.3; applicable from 14 January 2027), Directive 2014/35/EU on low voltage and Regulation (EU) 2019/1781. Only the name and number of each rule are cited; applying them and the legal responsibility rest with the customer.
Compare the options
| Custom engraved anodized aluminium nameplates | Best for: Machinery makers: pumps, valves, compressors, HVAC, motors and electrical distribution equipment · Check: References equipment makers usually consult: Regulation (EU) 2023/1230 on machinery (Article 10(5) and (6) and Annex III 1.7.3; applicable from 14 January 2027), Directive 2014/35/EU on low voltage and Regulation (EU) 2019/1781. Only the name and number of each rule are cited; applying them and the legal responsibility rest with the customer |
|---|---|
| Custom polyester labels: serialized, tamper-evident and laminated | Best for: Asset inventory and warranty seals · Check: The production partner provides datasheets and test reports on request. Samples or trials: conditions are stated in the offer. Regulatory references usually consulted: REACH and Regulation (EU) 2025/40 (PPWR). Only the name and number of each rule are cited; applying them and the legal responsibility rest with the customer |
| Custom etched and laser-marked stainless steel nameplates | Best for: Food and beverage industry equipment (equipment identification plate) · Check: The production partner provides datasheets and test reports on request. Samples or trials: conditions are stated in the offer |
Applications
- Machinery makers: pumps, valves, compressors, HVAC, motors and electrical distribution equipment.
- Electrical panels and automation.
- Equipment rental and maintenance.
- Metal products, vehicles and transport equipment (non-statutory plates).
- Battery pack and energy storage cabinet makers: the plate is the carrier and the content is the customer's.
Materials and finishes
- Anodized aluminium in silver, black or colours; usual thicknesses of 0.3 to 2 mm (indicative reference).
- The same type of plate in 304/316 stainless steel or in brass.
- Processes: laser engraving, chemical etching with colour fill, screen printing or UV printing, and stamping.
- Fixing holes (for example, four), rounded corners and rear adhesive.
- Serial number, barcode, QR and DataMatrix.
Serialization and verification options
- Sequential serial numbers from your variable-data table.
- QR or DataMatrix code on each plate.
- Online verification page linked to the code (scope to be defined in the enquiry).
- Layout in Spanish, Portuguese and English for the fields the customer specifies.
- Vector file check and a small trial run before production.
Typical specifications
| Material | Anodized aluminium (silver, black, colours) |
|---|---|
| Usual thickness | 0.3 to 2 mm (indicative) |
| Marking | Laser, chemical etch with fill, screen print/UV, stamping |
| Fixing | Holes or rear adhesive |
| Variable data | Serial, barcode, QR, DataMatrix |
| Dimensions | To the customer's drawing |
Indicative range values, not a commitment: final specifications are set in the offer.
What we need to quote
- Vector file (AI, PDF or DXF).
- Dimensions, thickness and material.
- Holes, adhesive and rounded corners.
- Operating environment: outdoor, chemicals or marine.
- Texts and languages.
- Variable-data table in CSV or Excel (serial, year, rated values).
- Quantity and delivery country.
Documentation available on request
The production partner provides datasheets and test reports on request. Samples or trials: conditions are stated in the offer.
Plate content and scope
References equipment makers usually consult: Regulation (EU) 2023/1230 on machinery (Article 10(5) and (6) and Annex III 1.7.3; applicable from 14 January 2027), Directive 2014/35/EU on low voltage and Regulation (EU) 2019/1781. Only the name and number of each rule are cited; applying them and the legal responsibility rest with the customer.
The content of the plate is defined by the customer, as the equipment production partner; we reproduce the artwork the customer has approved and signed. Data plates for equipment under Directive 2014/68/EU (pressure equipment) or Directive 2014/34/EU (explosive atmospheres) are not accepted, because of their safety nature.
Frequently asked questions
Which files do you need to get started?
Vector files (AI, PDF or DXF) and, if the plates are numbered, a variable-data table in CSV or Excel with serials, years or rated values.
Can each plate be numbered and carry a QR code?
Yes. Each plate can carry its serial number, a barcode, QR or DataMatrix. The scope of an associated verification page is defined in the enquiry.
Do you check the content of a plate with CE marking?
No. The equipment production partner defines the content and we reproduce the artwork they approve and sign; we do not review or validate whether it fits the regulations.
Are there materials other than aluminium?
Yes: 304/316 stainless steel, which resists corrosion and chemicals, and brass. Tell us the operating environment and we will propose the material.
Do you accept plates for pressure equipment or ATEX?
No. Data plates for equipment under Directive 2014/68/EU (pressure equipment) or Directive 2014/34/EU (explosive atmospheres) are not accepted, because of their safety nature.
When should I not use it?
References equipment makers usually consult: Regulation (EU) 2023/1230 on machinery (Article 10(5) and (6) and Annex III 1.7.3; applicable from 14 January 2027), Directive 2014/35/EU on low voltage and Regulation (EU) 2019/1781. Only the name and number of each rule are cited; applying them and the legal responsibility rest with the customer.
What do you need to quote it?
Vector file (AI, PDF or DXF).; Dimensions, thickness and material.; Holes, adhesive and rounded corners..
What documentation is available?
The production partner provides datasheets and test reports on request.
Can you ship to my country?
The route is confirmed in the offer: the order may ship from Spain or directly from the production partner. Customs formalities, VAT and duties depend on the destination and are stated in the offer.
Request a quote
Send us the vector file, material, quantity and variable data. Business orders only (B2B). Lead time and price are confirmed in the offer.
Business orders only (B2B). Lead time and price are confirmed in the offer.